Norvise O-Ring Refurbish Kit
Over time we realize some of the components of the vise, namely the O rings can become
worn and need to be replaced. If you live in a particularly dry climate you have probably
had your O rings dry out and split. We have packaged up all three ring sizes used on the
vise and bobbin; one for the center arbor (behind the rear hub), one for the friction nut
and four for the bobbin / spool arbor. We have also included 1 garter spring to upgrade
the O ring on your jaw (if you have an older vise) and a few of the small set screws that
always seem to get lost as well as the rubber grommet for the thread post.