By Braden MillerThursday, after 8 days in Emerald Isle Albie fishing, spending time on the beach with my family, wearing board shorts and flip flops we made the four hour drive home to meet Tim at my house. Mom and I were home for a hour and a half, just enough time to unpack the trucks, switch some clothes into another bag and we got back in the truck to head to Sylva, NC for the Tuckaseegee Fly Shop’s Norvise Demo Day at their Sylva location. Our 6 hour drive ended up being close to 8 hours due to accidents and all lanes closed for a bit. Friday morning we woke up to temps in the 40’s so we traded our board shorts and flip flops for jeans, sweatshirts and shoes! Mom, Tim and I got some breakfast before we headed to the shop to set up our vises for Demo Day on Saturday before we heading to the river with Shannon “Big Mess” Messer (I loved how he answered the phone Tuck Fly Shop, Big Mess speaking can I help you?). We all got our waders on (even Mom) and headed out to do some Euro Nymphing, which I had not done before.Tim and I both were using the Temple Fork Outfitters Drift Rod. After a quick Euro Nymphing lesson and some tips from our amazing guide, Big Mess, Tim quickly caught his first wild rainbow of the day and I wasn’t far behind him. After fighting Albies in the Atlantic Ocean for a week, I set the hook rather strongly and launched two poor little rainbows right out of the water. Luckily for both the fish and myself they stayed on the hook and landed back in the water. We fished several sections of the river and probably caught 25 or so wild rainbows and Tim landed one wild brown. We caught a bunch of beautiful small rainbows, a handful of decent sized rainbows and I caught a rather chunky fellow. Shannon recommended we have dinner at really good BBQ restaurant called Haystack Smokehouse. Man was that some good food; from the Brunswick Stew, to the pulled pork, brisket, andouille sausage and especially the Banana Pudding. I can personally say we will never go to Sylva and not eat at the Haystack Smokehouse (man now, I wish I could eat dinner there tonight). It was an early night for the three of us so we could be ready for Demo Day Saturday. Brr, Saturday morning was even colder than Friday! This was the first morning this year I have seen frost on our truck. We arrived at the shop around 7:45 to make sure we were ready when the store opened and so Tim could record his episode for the shop’s *podcast called, Tuck Cast, With A Splash of Bourbon, with Shannon “Big Mess” Messer, Bobby the Bearded Wonder and Coach Dale Diesel Collins. Tim and the guys talked about the story/history of Norvise and what makes it so unique. They dove into Tim's relationship with the late Norm Norlander and what it takes to produce the Norvise Fly Tying System. Saturday was Big Mess’s 50th birthday and Tim’s 49th birthday. Once the shop opened there was a steady flow of customers throughout the day. We meet some current Norvise owners that came to visit for Demo Day. Some upgraded their vise or added a new Auto Bobbin or two to their collection. There were some who came to the shop to check out exactly what the Norvise was capable of and some came with intentions of joining the many other Norvise tiers. Tim gave his normal show demo for a group of people, he challenged several to take his bet could he tie a wooly bugger in under 60 seconds? If you have never seen him in person at a show, Tim bets someone that if he can tie a wooly bugger in under 60 seconds then they have to purchase a full set up and if he fails, he will give them a full set up. I have been going to shows with Tim for two and a half years now and I have never seen him lose… not too many people ever take the bet. I spent my day tying game changers and a baitfish or two. Every time I finished tying a new game changer, someone would buy it from me. I know selling flies is what a tier strives for, but for those of you who know me, whenever I tie a new fly, especially a game changer, I form this sort of attachment to each one of them. I am very thankful to those who loved the flies I tied Saturday so much, they wanted to fish with them. I look forward to seeing what they catch. Mom, Tim and I all had a wonderful day at Tuckaseegee Fly Shop for their Norvise Demo Day. We look forward to returning to Sylva soon to visit the shop again, see all they guys and Norvise fans, and of course to do some more fishing in the trout capital of North Carolina. Thank you to everyone who came out to the Norvise Demo Day to see Mr. Tim and I, and for checking out what makes the Norvise the most innovative fly tying system on the market today. If you are ever in Sylva or Bryson City, North Carolina you have to remember to stop in one of Tuckaseegee Fly Shop and say hello. Till next time...
Tight lines - Tim This week's blog post comes to us from Norvise ambassador Mike Corrigan. Mike spent some time chasing the fish of 10,000 casts during the pandemic and he shares his experience here. This is a timely post as we just put up his video "Mike Corrigan ties the Comet Minnow" on our YouTube page. You can see the video by clicking HERE If you have not already you may want to subscribe to the new Norvise YouTube channel. we are posting 2 videos per week, this is a great resource for learning new techniques on the Norvise. Since landing my first Musky a few years ago, I have been addicted to the maddening follows and the mayhem that ensues if the fish do commit. When able to spend a day on the water pursuing Muskies, I generally define success simply by the number of “follows”. Fish or no fish it is a day well spent just to be able to entice these predators. Interestingly, the smaller lakes that do have Musky here locally are generally devoid of other fly rod species; there are Musky and there is bait! A year ago I decided to hire a guide and get serious about chasing Musky. Where I am living in central Canada there are a lot of Musky, but no guides that cater to fly anglers. As a former guide, all I was looking for was someone with the knowledge of the water and the habits of the fish. The lake the guide selected was absolutely perfect for fly fishing, it is a long narrow lake with lots of bays and as it turned out an abundance of fish; both Musky and Tiger Musky. Much to the guides surprise, we did very well that day, well enough for me to plan a trip back in 2020. Over this past winter, with last years trip in mind, I contacted some buddies in at my local fly fishing club (Manitoba Fly Fishers Association) and it was very easy to fill the 5 other spots. The plan was to stay at a drive to lodge a few hours away, in the heart of Musky country, and give it a go. Four of the 5 others had never cast a fly to a Musky let alone seen one in person. With expectations tempered for the “fish of ten thousand casts”, and warnings from the lodge owners that Musky on a fly was a tough go, we hatched a plan. Fly fishers, it seems, are certainly the eternal optimists. Between that December 2019 fishing pact with the group and the whole world being turned upside down with the COVID issue things were touch and go. The trip was on then off then back on, then delayed. Our assigned week was moved 3 weeks past the season opener, but we did have the plan finally come together with the original 6. The 4 newbies hired the guide I had used the previous year for a day; splitting the morning and afternoon session so all had a chance to learn the way of the Musky. The fly patterns we used were small compared to the ones that are touted as a requirement to catch Musky. The fly I refer to as my “Goldfish” accounted for my 40” and 41” fish plus numerous other smaller ones. We didn’t throw flies any longer than about 5”. The Musky were also keyed into top water and large 1” square poppers did the trick. As an aside, I do fish Musky from a pontoon boat on some of the smaller local lakes. I have observed, on several occasions, that during the Hexigenia hatch the Musky will slurp these easy prey like a Trout. So, it is not all about the top predator only eating baitfish. Apparently, Musky like to change up their food source as well. For the duration of the trip we all fished barbless hooks. It is not a local requirement but it is just the way we fish. Most of the Musky we landed did not require any hook removal whatsoever. With their nasty sets of teeth we reasoned that they bite down on the fly and their teeth get tangled in the material that we dressed the fly with. Once they feel the net they seemed to open their mouths and the fly “self-released”. One morning we had a rain delay and I went through leader building with the Knot2Kinky wire. It is amazing stuff to use once you get comfortable with the knots. As most anglers know a normal store bought leader would be good for one toothy fish and then it is finished. During the week we noticed some rather odd Musky behavior. We had several fish put their noses literally on the gas motor as we were using the electric to maneuver the boat along the shoreline. We also had a 40” plus fish follow us along the side of the boat (within a rod length) for several hundred feet of shoreline; we literally cast over its head into the likely holding water. It seemed they may be programmed that a release of a tired Walleye might happen? For most of the week we would follow up a cast with a large oval pattern with the rod tip, often seeing Musky appear from the depths. We would drop the rod tip well within the water column, so the fly would have a downward movement followed by raising the rod tip and subsequent ascent of the fly. This technique would end up producing several fish including my largest. Figure 8’s aren’t impossible with a fly, but they are more difficult. The week really was one for the memory banks and it was a trip of a lifetime for most. We have plans for 2021 already in place and we may do some exploring to some neighbouring lakes as well. Like I say this part of Canada is Musky Central and there are lakes available with the 50” plus brutes, but I am still “baby stepping” my way up to them after landing some of the hawgs on this trip.
Mike Corrigan Well, the crew made the 6 hour trek west again this year to chase what has become one of my favorite fish, the Northern Pike. This marks the second year we have done this trip and I am sure it won’t be the last. I mean, what is not to like about big, aggressive, toothy fish? I just love this type of fishing! We left Delaware Friday afternoon, we fished Saturday and Sunday and we made the easy drive east on the PA turnpike home early Monday morning. We were all tired, worn out and sore, it was 100% worth it! If you have never taken a Pike on the fly I would suggest you do it ASAP. This is a very visual fishery with big flies, big fish sometimes at very close quarters. The take is incredible, to the point it can actually frighten you when it happens. I just love every part of it. We are typically fishing out of drift rafts and the Smith Fly boats are perfect for this type of fishery. The lack of proper boat ramps along the river makes having a portable, light weight boat a must. It would be very hard, almost impossible to fish a hard hull here. We like the Smith Fly rafts so much we brought a “great Big Shoals” 15 footer home with us! 9 weight rods are the norm with an intermediate shooting head line. We opted for a variety of Temple Fork Outfitters rods including the Mangrove, Axiom 2 and the new A2X rods all paired with BVK and BVK 3 reels. Lines were Rio’s Outbound Short intermediate heads with floating running lines. If you have ever looked into the mouth of a big Northern you will see rows and rows of large, sharp teeth. Wire bite tippet is not a suggestion it is a must! Leaders were fairly simple, 30# mono, 20# mono and a section of 30 pound knotable wire. The entire leader system is less than 3 feet long. The flies we used were pretty diverse. We threw Game Changers (several varieties) bulkhead hollow flies, double deceivers and Pat Cohen’s Man Bear Pig. On the ride home Ed said “that Man Bear Pig May be the perfect fly for this type of fishing”. One thing is for sure. What ever fly you use make sure it has a sturdy, sharp, heavy gage hook, these fish are no joke. And they will absolutely destroy a poorly tied fly with a cheap hook! The fishing is pretty simple for these fish. Pound the banks as much as you can and strip, strip, pause. Josh, one of our guides said they get probably 80% of their pike eats on the pause. One thing I will say is you have get the fly in the kitchen, possibly on the dinner plate, and Pike live in some nasty places. You can’t be afraid to put your fly in harms way. Snags, both in and above the water are the norm, know that going in. The first day we spent almost 10 hours in the boat. Pounding the banks and stripping the fly all the way back to the boat translated into a lot of casting...a lot. We were very thankful for the light swing weight of TFO’s Axiom rod series. Throwing a 9 weight for 10 hours can be tough. The Axiom 9 weights could be cast all day with no issue. Pike fishing is a numbers game, with a “moved” fish almost as exciting as a landed fish (almost) in 2 days of fishing two boats, each with 2 anglers moved close to 60 fish landing 17. Size ranged from a few hammer handles to a 36 inch tank. Not quite the fish of 10,000 casts like their bigger cousin the Musky, but not like shooting fish in barrel ether. Wile they are aggressive and once they commit they are all in, they certainly are not stupid. Good accurate casts and a varied, erratic retrieve were a must. I can’t tell you haw many times Josh would say “put some pauses in there” I am glad he did because when that fly stopped and kicked sideways… Till next time,
Tight Lines – Tim Every year during the change of the seasons several things happen. Snow melts, Daffodils bloom, trees leaf and the Dogwoods bloom. It seems the blooming of the Dogwoods symbolize many things in the outdoors. Any central Pennsylvania Trout worth his salt will tell you that is the time for the Grannom Caddis. Well, if you are from my area in Northern Delaware the Dogwood bloom means one thing…Shad! Shad are a member of the Herring family and every year around the third week in April they descend on our tributaries in droves. Fresh from the ocean and looking to spawn they are strong, feisty and tailor made to be taken on the fly. The “run” can vary in length (time) and intensity. During strong runs several fish per hour is the norm and a triple digit count on a morning or evening outing is an attainable goal. Yes, it is fair to say I do love the Shad run. Shad fishing is actually pretty simple, a five, six or seven, weight rod, a intermediate or type II sink tip line and a small selection of flies will cover it. We will cast across river, almost at a 90 deg angle, let the fly sink and they twitch it as the current swings the rig down river, below where we are standing. If you choose you can let the fly dangle downstream, if you can wait long enough a fish will come up and take it, I will usually pick it up and re-cast. Flies are fairly simple, anything bright and flashy will do, I do have several of my own designs specifically for Shad, honestly a chartreuse bigger or the venerable ole’ Mickey Finn would fill the bill just fine. Note, to see me tie a few of these patterns visit our new YouTube page by clicking HERE feel free to click subscribe when you are there. For this outing we were fishing some new TFO gear. I had my TFO A2X 9 foot 5 weight. I have been using this rod to throw streamers to Trout on some local rivers, this shad run was the specific reason I got this set up. I was throwing an intermediate shooting head with a short (1.5 foot) T8 sink tip. Tyler was fishing the Drift rod set up as a Micro Spey. Two handed casting with a 2, 3, or four weight Micro Spey set up is fantastic fun on the Shad river. We were into fish form basically the first cast, I don’t know how many we landed, we estimated about 150 between the 2 of us. It was a fantastic day on the water. The Shad run is something special that happens each year. Some better than others, some are epic. One thing is for sure, these fish are a ton of fun!
If you would like to learn more about this great fishery book my "Shad Fishing 101" presentation for your club or private group. It is full o tons of information to chase these strong, hard fighting fish. Till next time... Tight Lines , Tim For anyone that knows me they know I absolutely love the Trout Nymphing game. I love tying the flies, love watching the sighter in a tight line rig, love watching the indicator on a indy rig, I lust plain love nymphing! Over the years my Trout game has revolved around the nymph, it still does and that will probably never change. That being said, every once in a while I get a hankering to throw streamers for Trout. It is not that I am against it, I actually quite enjoy throwing streamers, I always seem to gravitate to the nymph when talking about Trout. We had quite a bit of rain through the week and all of our rivers were running high. my good friend and Norvise ambassador Ed "One Boot" Hays sent me a text on Friday afternoon, you all know the text, the kind that two fishing buddies send to each other. Few words, but the message is loud and clear ""Killing it on the FF section" That was it, but that was enough, I knew exactly where he was and I knew I would be throwing streamers on Sunday morning. The Axiom II X; When I first cast the Axiom II X at the Virginia Fly Fishing and Wine festival back in January Nick Conklin of TFO told me I was going to like it. He was right, When I first cast Tyler's A2X 8 weight in October I said "I see a LOT of iridescent blue in my future. When I saw that TFO was offering this rod in a 5 weight with a fighting butt I know this was going to be my first purchase. Originally, this was to be my new Hickory Shad set up. Paired with a BVK sealed drag reel and a Outbound Short F / I line this was going to be some bad mojo for Shad this spring. Well, COVID-19 took care of our Shad season and I was itching to get this set up out on the water. Sunday was my day. I went to my tried and true streamer set up. as mentioned I already had a Outbound Short intermediate line on there, to that I looped to looped a 1.5' piece of T11, a 3' piece of 3X and my all time favorite streamer, Kelly Gallops Zoo Cougar. When we first hit the water I was surprised at how easy the Axiom 2 X could handle the weight of the rig. Not that this was a ton of weight, it just didn't feel like I was throwing a sink tip at all, it barley feat like I was throwing an intermediate line. As mentioned Ed was with me, he too was throwing the A2X five weight. Now, I would much prefer to fish over wild fish. Today scheduling and family commitments would prevent us from making the day trip to our favorite wild fish river, we would have to stay closer to home and beat up on some stockers. Now to be clear I said I would "prefer" to fish over wild fish, I have no problem catching stocked fish. "They have fins" as the boys down south always say, I agree, so we were on the water early Sunday morning rigged and ready to go. It didn't take long, we had fished down about 100 yards of river and I saw Ed come tight to a fat Rainbow. The formula was simple, pound the cut banks from the far side, strip, strip, pause. Let the rig do its thing and settle the fly down in the slot. Strip, strip, pause, repeat. Take a few steps down, bomb the far cut bank, strip, strip, pause, repeat. Every once in a while, on the pause BANG! I love the violence of a streamer take. We had been fishing for a while, not setting the world on fire, but catching a few fish. I was as interested in working the rod as well as catching fish. I was impressed with the accuracy I could obtain with the weighted head, I was really impressed with how well the rod could handle a inverted loop cast, a cast you must have in your bag of tricks if you are going to wade and streamer fish. I had a few of the Bugger type flies pictured above sent to me by mu buddy Tony Muncy of Muncy designs. These things looked cool and I wanted to see how they looked in the water. Three casts in I was hooked to a solid rainbow. Ed took this picture just as I netted the fish. These leech type buggers worked very well, so much so that I contacted Tony today and placed an order for 3 dozen, Then I bought every color of dubbing he uses to make the body of these that the company makes. Yup, they looked that good! All in all it was a great morning on the water, we got into some fish, I got to try out a new rig that I am VERY happy with (Ed loves his as well) and we had a good time. In the end, isn't that what it is all about? Till next time.
Tight lines...Tim Tyler and I had the pleasure of fishing with central Pennsylvania's premier Smallmouth guides, Brian Shumaker. Brian is the owner of Susquehanna River Guides and has spent the past 30 years floating the rivers in and around west central PA including the fabled Susquehanna and Juniata rivers. Brian has become a good friend over the years so we jumped at the chance to spend a day on the water with him. We did the 2 hour ride from our place to the meeting spot in record time where we then followed Brian with his Hyde drift boat in tow to the um, well, we will say...boat ramp. We were on a smaller piece of water Brain can only float in his hard hull during the Spring. later in the year there is simply not enough water to get down this particular river. Getting the boat in the water was interesting, but we got it down the bank and we were soon on our way. Smallmouth are my favorite fish, they are beautiful, hard fighting and are tailor made for fly fishing. We spent the day pounding the banks and back eddies with streamers and slowly stripping them back. "Stripping them back" is really a bit of a misnomer, really we were just letting the flies hang and swing a bit and just keeping the line tight as the boat drifted down river. This is a cool technique as once you "get" it you can literally hold the fly in one spot for an extended amount of time to entice a big ole' bronze back to come up from the deeper water and smash it. We started off a little slow, typical with spring time smallmouth fishing as the water was still a bit on the cool side at 52 degrees. When the sun got up and the water warmed so did the fishing. As soon as he stepped up on to the front casting position Brian was tight to a solid smallmouth. Literally it was on his first or 2nd cast! nThis was not a guided trip, it was what we call a "row and go" meaning three guys are in the boat, 2 guys fishing and 1 rowing the boat. We would switch positions so every got to fish and every one would row. If rowing a drift boat is not something you do every day you will soon appreciate the skill of an accomplished oarsman. It is not as easy as a good rower makes it look...just ask Tyler. I really think you should spend some time on the oars if you can, it will give you a better appreciation of how everyone needs to work together for the boat to be successful. Tyler was picking it up toward the end, I am very excited for our Smith Fly raft to be completed so we can start floating some of our local (and not so local) rivers this summer. On his second stint on the bow Tyler stuck a good fish followed by an even better smallie. Tyler and I were fishing some of TFO's new gear, mainly the Axiom 2 X rods and the new BVK sealed drag reels. As mentioned smallmouth are my favorite fish to fish for, coincidentally we spend a lot of time chasing them each year. For years my go to set up has always been a 7 weight. We throw some pretty big flies when chasing smallies; Game changers, O'Neill's Controlled Chaos, O'Neill's Hovercraft, weighted crayfish patterns and the like. For me a 6 weight just doesn't have the muscle needed to punch these bigger, wind resistant flies through the air. It is not uncommon for us to be on the water all day and honestly an 8 weight was just too heavy to cast for 10 hours straight, that is why I prefer a 7 weight. Until now. During one of my turns in the back of the boat I looked down in the rod holder and low and behold there was Tyler's Brand new A2X 8 weight. Will, I am not one to let a new rod to go to waste so I figured I would break it in for him. As mentioned earlier I am a huge fan of a 7 weight. That being said, if you get a little more than I light breeze the shortcoming of the 7 weight quickly comes to light, especially if you are trying to punch 60' casts with big flies. This was the first time I really got to spend with the A2X 8 weight. The first thing you notice is the overall weight of the rod. If you didn't know any better you would swear it you were holding a 6 weight. Load it up to cast and it is quite apparent what you are holding. Paired with an aggressive, weight forward shooting head this stick is an absolute rocket. It is light in the hand, you can cast it all day and it has plenty of punch to drive a big, articulated fly through the air with ease. It is a bit early to say it is my new favorite, but it will be a staple in my quiver for sure. Several hours later and sever rotations on the oars we were at the take out. We had had a fantastic day with several Smallmouth landed along with a bonus Walleye, my first ever. If you are looking for a fantastic central Pennsylvania Smallmouth experience Give my buddy Brian a call or check out his Facebook HERE. You will be glad you did. Till next time...
Tight lines, Tim |
Archives
June 2024
Categories
All
|