We recently had the honor of being written up in Fish Alaska Magazine. Norvise and Fish Alaska have a long relationship that goes way back. George, the editor and author of the article and Norm were friends. Maybe that is why the article has a personal feel to it. Thank you George for writing the article and than you Fish Alaska for being such a great partner.
As mentioned in my "5 favorite Smallmouth Flies" post a few weeks ago, any Smallie fisherman worth his salt has a large assortment of Poppers. Smallmouth bass were tailor made for fly fishing. I have often said "pound for pound Smallmouth are the hardest fighting freshwater fish that swims". I dont think any true Smallie addict would argue that statement. Add to that a fish that is willing, dare I say prefers, to take a fly off the surface and you just may have the perfect fly rod fish!
I love poppers! I love fishing them, I love tying them, I love designing new ones, I just plain love poppers. What is better than watching a huge frog or fish popper disappear in that tell tale "flush" of water then when you throw the steel to them, they just loose their mind. Watching a popper be eaten may be one of the most exciting things in fly fishing! Below is one of my favorite popper designs, it can be tied very small say on a #4 hook to very large, on a 4/0. This is the pattern I base most of my other popper designs off of. You can change the tail to Cohen's Creatures frog legs for a frog popper, bucktail and saddles for a longer profile or you can even articulate it.
Check out this great pattern below...
Recipe; This is for the "Bleeding Shad color, we also do Fire tiger and Burple (black / purple)
Hook; Gamakatsu B10S (this is a size 1)
Thread; Tyer's choice, color to match body (I am using Veevus 6/0)
Tail; One white and 1 grey Marabou blood quill tip tied and palmered.
Body; complex twist of 1 white schlappen feather and UV Polar chenille, silver
Collar; Senyo's laser dub
Head; Flymen double barrel Popper hers (this is a medium head)
Eyes; Flymen 4mm Ice eyes
I am using the Norvise Large Inline , Norvise Magnum Hubs and Norvise Material Clip to tie this pattern.
Tie both feathers in at the same time by the tip at the point where the thread ends right above the barb. Wrap 3 or 4 turns forward, Fold the tip back and wrap back over 3 or 4 tight turns back to front. This "fold in" method will keep the tips from pulling out while you are palmering the feathers forward.
Advance the thread forward to just past the tie in point, half hitch and place the bobbin on the thread post. I like to grab the feather stems with a pair of hackle pliers. Now wrap the feathers forward (or spin your Norvise) taking care not to trap any of the feather under the stem. Once you have wrapped the whole 3/4 of an inch of feather tie off the bare stems with several tight wraps.
Marabou gets a bad rap in my opinion for not being durable, here is how to make it very strong. Use your bodkin or a tooth brush and stroke back all the marabou, Take care to make sure they are evenly distributed around the hook shank. Now, take your thread and COMPLETLY cover the stems with thread. A drop of Flex Cement here is a fantastic idea. By covering the stems you are protecting the weakest part of the tail. If the stems don't blow up, the tail will last a very long time. I have tales tied in this manner with well over 50 Pickerel landed and the tails look almost brand new. Remember, a Pickerel is a cousin of the Pike and Musky!
Now, hold the feather and the Polar Chenille together with a pair of hackle pliers at the base and spin them together. This will make a dubbing brush of sorts. This "Complex Twist" will blend the feather and the polar chenille together, it will also strengthen the feather by wrapping the core of the polar chenille around the feather stem again, protecting the weakest part of the brush. You will have to use a brush of your bodkin to pick out the fibers. Spin a little and brush, spin and brush, etc. Note; at the bottom there is a link to a video showing how to do this step by spinning your Norvise, it is pretty cool.
Now we are going top build the collar. We will use Senyo's laser dub, red on the bottom and white on the top. Select a small bit, about the thickness of a match stick. Align the the fibers and tie the clump to the hook in the middle. Make sure the material is distributed 180 degrees around the bottom of the hook. Repeat this step in the top with white laser dub.
Cover the entire front of the hook with several layers of thread. This will give the glue something to grip on TEST FIT THE HEAD FIRST! once you are happy with it use ZAP-A-Gap to glue the head to the hook. Warning; you have 1 shot and about 7 seconds before the glue takes hold! Get the head on and situated quickly, if not you may be cutting a perfectly good popper head off and trying again!
This is one of my favorite of my designs. I say "My" designs, The palmered tail I learned from Rich Strolis and the body I learned from Eric Snyder. Thanks guys for being part of a great pattern! Till next time...
Tight lines - Tim
For a link to a quick video on how to do the complex twist using the Norvise, click HERE.
One of our Norvise ambassadors recently got some ink in a well publicized magazine. Read on to learn about what the author touts as the brightest young fly tier to hail from the "Old Dominion" state.
Many of you have heard us talk about Braden Miller. Braden is one of our Norvise ambassadors, a fantastic fly tier, great fly fisherman and all around just a quality human being. These things probably won't surprise you as anyone that has ascended to ambassador level of three major manufactures with in the industry (Braden is a TFO and Fair Flies ambassador as well) would naturally possess these talents. What you may find surprising is his age, Braden has accomplished this at the ripe old age of 13! That's correct, Braden just became a teenager less than a year ago. We here at Norvise are proud of Braden. Proud of what he has accomplished, proud to have him as an ambassador, and most importantly, proud to call he (and all of his family) friend. Check out the article and give him a follow on Instagram and Facebook. He is a great follow.
Click the link to read this fantastic article.
They didn't make it into the article, but below are the pictures of Braden's Musky taken by photographer extraordinaire Casey Miller. Now, here is where I must mention Braden's parents Casey and Will. Now, I personally don't know too many parents, especially mom's, that would sit on the back of a drift boat in December so their son could catch a Musky with his idol. That is exactly what Casey did. Whether they are driving (or flying him) a few hundred to a few thousand miles to do a show, or freezing in the back of a drift boat in December, Casey and Will are totally on board and supporting Braden every step of the way. You really have to admire strong willed, southern parents that have raised their kids (ALL 4 BOYS!) to be respectful young men and support the kids dreams. Casey and Will, your boys are lucky to have you!
Check out these pics!
Braden will be at many of the fly fishing and fly tying expo's this season. We will be posting up a schedule as soon as the dates are available. If you are at one of these shows stop out and meet Braden. Spend just a few minutes with this young man and you will quickly realize the authors comments are 100% accurate. The Fly Fishing and Fly Tying Future is in fact very bright in Virginia and Braden is carrying the torch at the head of the line! Till next time...
Tight lines - Tim