I just bought a Norvise...now what?
By Norvise ambassador Brian Davenport
Congratulations on your new purchase. Hopefully you also bought a Norvise Automatic Bobbin as well. If you haven’t- you should go do that right now! The two go together like peanut butter and jelly. The only way to get the full potential of the Norvise system is to have both the Norvise and the Norvise Automatic Bobbin
There is a bit of a learning curve with the Norvise, but there are some things you can do to shorten the curve tremendously!
First things first, start by watching the video that came with your Norvise to see how the system works. If your brand new to fly tying this will be a great help and you will learn a lot. If you’re a seasoned tier, this will show you how to use the system, and how it differs from your prior setup.
(to see the video Brian is talking about click HERE)
After watching the video, I sat down behind my Norvise and got to work.
Now a Norvise Automatic Bobbin is a special tool that you will learn to love! In the video, Norm demonstrates how to wrap the thread around the leg of the bobbin, to provide adequate tension.
Here is a little trick to help with that. Once you have the thread through the tube on the bobbin, attach it to the thread post across from your vise. Do this by placing a few wraps of thread around the button. At this point, your bobbin will be hanging from the button on the thread post. Make sure the bobbin is oriented with the thread coming off the bobbin towards you. With your thumb, push the thread through the legs of the bobbin, and catch it with your finger on the back side. Bring it down, around the spool. Do this twice and then the tension is set. This helps so that you don’t accidentally pull the thread back out of the bobbin-- and once you’re done it is already secured to the post.
During the learning curve, this will be something you do quite a bit of! Part of the learning curve is to make sure when you cut your thread, to use your hand to put tension on the bobbin hub, so that it doesn’t zip the thread back through. It will happen-so just prepare for it! After a few times of having to rethread your bobbin, you’ll get the muscle memory down to do it and then you will do it without even thinking about it.
One of the things I missed when watching the video, is which way you spin the vise. It seems pretty straight forward, but I had a few issues with my flies until I watched the video a second time. If you watch carefully, Norm spins the vise towards him, rather than away from him. When I really thought about how I used my old vise and wrapped the thread on the hook, it makes sense. You need to turn the vice toward you so that it will wrap the thread away from you like on your old vise. Small detail, but easy to miss. And can make your first few interactions on your new vise frustrating if you don’t get it right.
Learn to tie a half hitch. The half hitch is your best friend when using the Norvise system. If you break your thread, it will save your fly from completely unraveling. It will also help when you use the vise for other techniques such as dubbing.
Also, when you go to move the bobbin off the thread post, be sure to keep enough tension on the thread, so that your material doesn’t unravel.
One final thing— materials go on the hook very easy with the Norvise—sometimes too easy! So it is very easy to crowd the hook eye. If you start your thread in the spot where you want your materials to end
Brian gives some sound advise in this article about the vise and the bobbin. Hopefully this will shorten the learning curve with your new Norvise. Till next time...