When Norm Norlander designed the NorVise it quickly became a classic tool to tie better quality, more consistent, and quicker flies. I think what we are all learning is that as we use the vise the versatility seems to be endless. I have had mine since the early years of its existence, and I am still finding new things it can do, with a few adaptations.
Years ago I wanted to come up with an extended body for a Mayfly and a Stonefly pattern. I took a piece of yarn, put one end in the vise and began spinning. What I ended up with was a section of yarn that would, when folded back on itself produce a stiff tightly wound body. The upside for production tiers was you could create the bodies assembly line fashion for later use. This technique morphed into using two or three strands of 30 gauge coloured wire and using the same spinning technique (without folding the wire back) to produce a very finely banded segmentation on the shank of small nymphs; it almost appears woven.
Flash forward to recent times and a new issue to deal with. With the advent of newer fly lines, there are a seemingly endless variety and an apparent specific application for every species! Saltwater lines are stiffer than Trout lines for example. Manufacturers are now offering Bass and Musky/Pike taper “warmer water” lines; lines that are stiffer than Trout lines, but softer than Saltwater lines. These lines are exceptional for throwing big flies, but the issue in more northern climes, with cold mornings or cold Fall days there is a lot of line memory when cold. As the day warms the issue does diminish.
So, back to the NorVise......I have always used a stripping basket in my boat to keep the fly line under control and away from the “line grabbers” which seem to be present even on a clean casting deck. Recently, I added a foam insert in the bottom of the basket with “pegs” made of old 60lb monofilament I had laying around (30 years at least). So, cue the NorVise to create the "pegs".
Step #1 as with the Mayfly/Stonefly bodies and the wire, I put one end of a 10-12” piece of mono in the jaws of the vise and spin the vise; holding the other end with forceps.
Step #2 once the mono becomes difficult to spin, place scissors at the midpoint of the mono and fold the forceps end of the mono back to the vise. Once the scissors are removed you will notice that the mono wraps back on itself to form the stiff “peg”.
Step #3 carefully remove the mono from the vise (so it doesn't unravel) and put both ends in the forceps and burn the tips together (not the loop end).
Step #4 move the forceps to the desired length (3-4”) and re-cut and burn the end as in step #3. I use "pegs" 3" long. You can use other things for pegs such as golf tees, etc. but the flexibility of the mono gives less resistance on the line as it exits the stripping basket.
TOP: The finished foam insert with the 9, 3" high "pegs". After poking holes in the foam base, I used a glue gun to hold the "pegs" in place.
BOTTOM: The foam insert in the bottom of the stripping basket.
The basket That I use is a leaf bucket or laundry hamper that is about 24" high and 17" in diameter. I decided to use 9 "pegs" in my basket and it does prevent the line coiling and line memory issues to get me through the cool part of the day and prevent the inevitable tangles. I use a multitude of lines from the big 3 manufacturers and they all, to some degree, have the same line memory issue.
Here is yet another great use of the vise in a non fly tying application. There are many, many more. This post is yet another example of why the Norvise is "The Most Innovative Fly Tying System On The Market" . Till next time.
Tight Lines - Tim